Installing the basket

Below you will find the instructions you need to assemble the Voltaire wastebasket.
These instructions are also available in the instructions attached to the wastebasket.

Below are the instructions available for download. An explanatory video is available at the end of this article and also on our YouTube channel.

Make sure that all parts are included in the box and that you have prepared all the tools necessary for assembly.

Step 1

Remove the black cap, then unscrew the fork screw to remove the headlight. Mount the mounting plate by passing the screw through the fork. Pay attention to the wiring in the tube if you have a Courcelles model. Tighten securely.

Step 2

Disconnect the headlight connector by pulling the cable through the rubber piece under the frame. Unscrew the headlight from its mount to secure it to the mount provided in the package.

Step 3

Place the basket upside down on a flat surface to connect the rods and the basket using two rod fixing plates.

Pay attention to the direction of the rods. The flat side is in contact with the fork. Do not tighten completely so that the basket can be adjusted.

Step 4

Screw the basket assembly and lamp holder to the mounting plate. The basket must be horizontal.

Step 5

Attach the right and left connections to the fork eyelets, placing the spacer between the basket and the fork.

Step 6

Secure the lamp cable with cable ties. Reconnect the connector by passing the wire through the rubber piece. Check that the lamp turns on correctly.

By following these step-by-step instructions, you can easily install your basket on your Voltaire bike.

To stay up to date with our latest news, receive even more tips from the team, and find out more about what goes on behind the scenes at the brand, sign up for the Voltaire newsletter below and find us on Instagram @voltaire.cycles by clicking on the link at the bottom of the page.